Language: EN | 中文 |

Aluminium Supplier #johor # KL# Penang # Malaysia # Singapore


Tag Selection


Mill Finished Coil

As per natural appearance of aluminium without any color coating. AMS has a reputation for providing brighter surfaces.

 

 

Natural Anodizing

Aluminium is a corrosion-resistant metal due to the film of aluminium oxide which occurs naturally on its surface. Anodizing is an applied finish by an electrochemical process that thickens the natural oxide film on the aluminium and imparts to the metal surface its extreme hardness and corrosive atmospheric conditions respectively.

Color Coating Coil

Various color can be customized in coil or in sheet form. There are major two coating types : PE and PVDF.

 

Powder Coating

Aluminum powder coating is the technique of applying dry paint to an aluminum product by electrostatically charging the powder and spraying it onto the product. The result is a material that is both durable and versatile, and can be utilised for nearly any purpose.

Anodizing

Normal natural anodizing color can be applied to coil or sheet . For other color anodizing, please check with sales.

 

Polishing

Aluminium polishing can greatly benefit the metal, making it more durable. Polishing aluminium is a wonderful method which can turn aluminium products into new conditions with shining surfaces. There are typically two types of polishing – chemical polish and mechanical polish.

Chequered/Tread

The chequered surface is generally used in step or ladder plates to enhance friction of surface or to avoid slippery. 5 bars or 3 bars , big or small, with different protrusion thicknesses can be manufactured. These days, the chequered surface is also used in aesthetic wall cover-up.

 

Wood Grain

Wood grain is the revolutionary new design of creating wood patterns on aluminum surfaces, which adds a natural and warm touch of elegance to building interiors.


More Details...

Stucco Embossed

Stucco surface is used normally for roofing to avoid reflectivity.

 

Clad (2, 3 or 4 ply)

It is used in the automotive industry. The filler surface is designed for brazing purposes.

Aluminum Plates Grade 5083

To differentiate plate versus sheet, the plate is categorized as thickness more than 5 mm and above. AMS carries aluminium plate from 5 mm till 200 mm , with common width of 1525 mm and length of 3050 mm. Common alloys are 5052, 5083, 6061 and 7075.<


More Details...

Aluminum Plates Grade 6061

To differentiate plate versus sheet, plate is categorized as thickness more than 5 mm and above . AMS carries aluminium plate from 5 mm till 200 mm , with common width of 1525 mm and length of 3050 mm . Common alloys are 5052, 5083, 6061 and 7075 .<


More Details...

Fluorocarbon

Fluorocarbon finishing is a high-quality process that involves thinly applying wet paint to aluminium extrusions via electrostatic spray to form a film that is further heated to polymerize and cure the coating. Fluorocarbon (PVDF) uses a 2-coat or 3-coat system where the electrostatic spray gun applies liquid paint two or three times onto the profile.<


More Details...